Another day, and another new exhaust for the Ninja 250R. This exhaust comes from Scorpion Exhausts (Who pretty much make exhausts to fix anything on wheels from bikes, cars, atv’s and even scooters)

This particular exhaust for the Ninja 250R doesn’t really stand out from the crowd looks wise, but it does have a great little sound to it. (See Video on the second page) In addition, Scorpion products tend to be pretty easy to come by, and easy to get good deals on — So I see this exhaust as becoming more and more popular over time. In addition, this exhaust was designed based off of stock fueling. So, no jet kit or mods are needed to support this guy, which makes this exhaust a great option for people just looking for a lil more sound and scoot..

Available in three finishes Stainless, Titanium, and Titanium Flame. Details and where to buy can be found here.

[Thanks for the tip NH!]

Click Here for Additional Content and Pictures:

Who loves ya? Mr. 2Fiddy loves yah! Thats who! Well, not just Mr 2Fiddy… Zartan the creator of the rad lil’ exhaust hangers for the Ninja 250R, must think y’all are pretty sweet too…

We’ll be giving away a Black Powder coated Steel Exhaust Hanger kit — But you Need to act Fast, as this Giveaway Ends @ Midnight on Sunday September 14th, 2008… And if you can’t wait: ORDER HERE. I know these guys are going fast, so don’t lolly-gag buying a kit.

And for a sweet writeup on these guys, check out KKims thread over at Kawiforums about it. (God bless KKim, he is the only person that can take a 10 Min DIY install, and turn it into a fraternity kegger…) And Yes, these are confirmed to work on both 2008 and 2009 Ninja 250R’s….

How to enter: Leave a comment here with your Favorite exhaust for the Ninja 250R. And give us a quick blurb why it’s your favorite. Example:

Mr. 2 FIddy Says: “I like the stock Exhaust since it is shiny, and is included free with the bike. I really like things that are shiny. They remind me of the Silver surfer and wet kittens… “

Zartan and I will choose one of the comments at Random to choose a winner. So make sure you use a real email address so we can contact you.

And Sorry Austrailia: This is open to US and Canada Only.

AND THE WINNER IS……..

Click Here for Additional Content and Pictures:

Woo-Hoo! Finally a way to get rid of those rear passengar foot pegs! (If you were lucky enough to get a seat cowl, there is no use for them) One of our 2Fiddy readers cranked out some custom exhaust hangers for the Ninja 250, and they look sharp! Quantity for these is limited, so if this is something that you’re interested in you’ll need to act fast. In fact, I sense these will be the next part bolted onto the Mr. 2Fiddy Rad Rocket (Just trying out the name.. No? Doesn’t work? Perhaps you prefer Mr 2Fiddy’s Thigh Sleigh?)

Available in both Black powder coat and clear coated aluminum.

Price: $60 for Black, $65 for Aluminum clear coat.
URL: Order Here

One of our readers KL sent in a nice picture of his new FMF Racing Apex Slip-on Exhaust (previously covered here). In fact, since that time, Apex has updated their site, and the exhaust they are offering for the Ninja 250 is the cylindrical version of the exhaust — not the diamond shaped one. All that aside, this exhaust comes in two forms Carbon Fiber and Titanium, and is overall a nice piece in the slipon category for this bike. (Price $400 - $435)

Sound-Clip:

Click Here for Additional Content and Pictures:

The international parts scene is kicking the poo out of the US scene as far as getting parts to market… Here is some more Japanese goodness in the form of an exhaust by Nojima. This is a full exhaust that actually has a super nice look to it, ( Sorta like a refined Yosh)  and I was really getting jealous that Asia is getting all these awesome goodies, and us…. Not so much…

Then I realized… it’s also almost a $1000 USD… Yah… Exactly..

So — I guess at the end of the day, I’m starting to understand why these are not imported… I really doubt that many Americans would dish out a cool K on an exhaust for a $4k Bike…

Manufacture: Nojima
Price: ￥99,750 (~$950 USD)
Link: Here

Thanks Rogg for sending this in…

Click Here for Additional Content and Pictures:

Hardrock Motorsports Released their HR1 exhaust for the Ninja 250R this past week. This is an interesting lil’ (literally) Exhaust, and finally brings something new to the mix vs your standard stainless / titanium / carbon fiber offerings…

The HR1 is small.. But, with it’s small size, it does give you the benefit of weight savings. The slip on canister weighs in at only 3.5 Lbs. In addition the HR1 has an interesting bit of technology built into it… Hardrock Motorsports calls it it “Variable Back Pressure Adjuster” — Which allows the user to adjust the back pressure of the exhaust to maximize mods.. Very Interesting.. Sorta grow as you go..

I haven’t found any sound clips or vids yet. But as soon as I do, I’ll make sure and get them up.

UPDATE: Video after the jump. Thanks for the link Michal!

Manufacture: hardrock Motorsports
Link
Price: ~$425.00

Click Here for Additional Content and Pictures:

Reader Chris sent me in this picture of his Homemade Shortie exhaust, and I just had to put it up. This is such a great little example of how crafty the 250R Community is getting.

Even better — When I asked Chris, he was nice enough to throw us together a lil step by step — AND — Add in some videos… Woot! So, if you’ve been looking for a shortie exhaust on the cheap… Here’s your chance..

Click Here for Additional Content and Pictures:

Last week there was a post about painting your heatshield… This week, one of our readers Chris submitted some great step by step info on hwo to do this, but also doing the end cap on the exhaust as well… This adds a super rad touch…

[The following was Submitted by Chirs. Thanks!]

Picture 1- Finished product a few days after the paint has completely dried in the bright light.

Click Here for Additional Content and Pictures:

So, one of our readers sent us in some pictures of his proof of concept exhaust hanger that he is thinking about creating for our beloved Ninja 250R’s… But he is looking to Gauge interest on wther or not it is worth creating these bad boys..

Well… Ummm.. HELL YEAH! It’s worth it… But he’s not just looking for my word, he’s looking for our readers word as well.. So tell him what you think… He says He’s going to try and get them to be around $60/each… Which I think is a fair price to slap some billet on my bike and get rid of those rear pegs…

So, If you want these — Comment here and tell him to start cranking these bad boys out — And Make sure you tell All your friends to do so as well.. Because all I have to say is DIBS!!! — I get #1…

Click Here for Additional Content and Pictures:

This is a real nice trick to spruce up your Black (Possibly red?) Ninja’s. Poster MurderedOut over at KawiForums posted up a few pics of his bike — and the first thing that caught my eye was the painted exhaust heat shield. To me, adding the paint really helps the blacks on the bike flow, instead of having this vomit of chrome brake side…

The How-To on this is pretty easy:

1. Remove 2 Bolts for heat shield.
2. Clean heat shield.
3. Lightly sand heat shield.
4. Shake Can.
5. Point and Spray.
6. Let Dry.
7. Re attach with 2 screws.

MurderedOut said he used a flat black.. And after thinking about it, I think I agree that the Flat black will look better than a high gloss black here. Either way — Make sure you get a high temp paint made for engine blocks, bbq grills, or other high temp applications. (Dupli-color makes a ceramic paint good up to 1200° which I highly recommend)

Click Here for Additional Content and Pictures: