Flush Mount Turn Signals
As of now, there is still not a Ninja specific bolt on / snap in flush mount kit for the 250R. However, the motorcycle aftermarket is pretty damn vast and has lots of parts available — Just sometimes needs someone to take the plunge and try a few things out to see what works.. That’s why people like Malaquite over at KawiForums just freaking rock — because they are willing to be the guinea pig, and then post how they did it.
These flush mounts are manufactured by Lockhart Phillips (Part number #122-9737). They can be found Here for only $18.
These look really nice for < $20.. And only require some slight modifications to the light (Not the Bike) to work. Also, be aware that you do need to clip some wires to get this to work.. So Make sure you solder and shrink wrap like good little kiddies to keep these guys nice and weather proof.. [ Editor Note: Wire Crimps and electrical tape are the spawn of the Devil. Man up and do it right!! If you don’t know how to solder There are some really good resources out there to help you learn! This is a talent everyone should have.. ]
[Pictures/Information republished with permission from Malaquite — Orginal Post Link ]
“The back plastic screw thing needs to be shaved down to the shape of the hole. If done properly it should fit nice and snug with out any play.”
Shade Of Black Said,
May 11, 2008 @ 3:21 pm
Not the best looking flush-mounts, but looks like a good alternative, especially since there’s virtually modification to the fairings. I’m amazed someone hasn’t come up with some nice flush-mounts specifically for the 08 250 considering how popular these puppies are.
[Reply]
Jeremy Said,
July 30, 2008 @ 10:30 pm
my cousin has the same bike and has the same flushmounts but when she turns the blinkers on they are solid…(they dont blink) did your do this?
[Reply]